Enabling RIPng on an Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number

   The interface view is displayed.

   The interface is on the network side of the router. Specifically, the router is connected to other devices through this interface. To enable the router to learn the routes to the network segment where this interface resides, ensure that the link status of the interface is Up.

3. Run ripng process-id enable

   RIPng is enabled on the specified interface.

   

   • In the interface view, this command cannot be executed if IPv6 has not been enabled on the interface.

   • If the router is connected to other devices through multiple interfaces, repeatedly perform Step 2 and Step 3.

4. Run commit

   The configuration is submitted.