(Optional) Configuring the RIPng Priority

When multiple routing protocols are running on the same device, you can adjust the priority of RIPng for route selection.

Run system-view
The system view is displayed.
Run ripng [ process-id ]
The RIPng process is created and the RIPng view is displayed.
Run preference { preference | { route-policy route-policy-name | route-filter route-filter-name } } ^*
The RIPng priority is set.

The preference command can be used with the routing policy to set the priority for the routes that meet the matching conditions.

After RIPng routes are delivered to the Routing Management (RM), if the RIPng priority changes, the RM updates the routing table.
Run commit
The configuration is submitted.