Configuring IPsec Authentication on a RIPng Interface

Configuring IP security (IPsec) authentication in the interface view is the other method used to configure IPsec authentication for RIPng.

An SA configured on an RIPng interface is used to authenticate the packets sent and received by the interface.

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run ripng ipsec sa sa-name
IPsec authentication is enabled on the interface, and the name of an SA is specified.

The ripng ipsec sa command takes precedence over the ipsec sa command. If both commands are run in respective views and different SA names are specified, only the configuration of the ripng ipsec sa command takes effect.
Run commit
The configuration is committed.