After IP security (IPsec) authentication for RIPng is configured, you can check the security association (SA) used in IPsec authentication and statistics on the RIPng packets that failed authentication.
Prerequisites
After IPsec authentication is enabled in a RIPng process or on a RIPng interface, the configuration takes effect immediately. There is no need to restart the RIPng process.
Procedure
- Run the display ripng process-id interface [ interface-type interface-number ] [ verbose ] command to check the SA used in IPsec authentication.
- Run the display ripng process-id statistics interface { all | interface-type interface-number [ verbose | neighbor neighbor-ipv6-address ] } command to check the number of RIPng packets that failed authentication.