Configuring SR-MPLS BE Traffic Statistics Collection

This section describes how to configure SR LSP (that is, SR-MPLS BE tunnel) traffic statistics collection.

The SR-MPLS BE traffic statistics collection function helps you collect statistics about traffic forwarded by an SR-MPLS BE tunnel.

Perform the following steps on the router:

Run the system-view command to enter the system view.
Run the segment-routing command to enter the Segment Routing view.
Run the traffic-statistics enable host [ ip-prefix ip-prefix-name ] command to enable SR-MPLS BE traffic statistics collection.
Run the commit command to commit the configuration.

After configuring SR-MPLS BE traffic statistics collection, verify the configuration.

Run the display segment-routing traffic-statistics [ ip-address mask-length ] [ verbose ] command to check SR-MPLS BE traffic statistics.

To clear traffic statistics before re-collection, run the reset segment-routing traffic-statistics [ ip-address mask-length ] command.