(Optional) Configuring SR on a PCC

Configure SR on a PCE client (PCC), so that a controller can deliver path information to the PCC (forwarder) after path computation.

Context

SR is configured on a PCC (forwarder). Path computation is delegated to the controller. After the controller computes a path, the controller sends a PCEP message to deliver path information to the PCC.

The path information can also be delivered by a third-party adapter to the forwarder. In this situation, SR does not need to be configured on the PCC, and the associated step can be skipped.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run pce-client

    A PCE client is configured, and the PCE client view is displayed.

  3. Run capability segment-routing

    SR is enabled for the PCE client.

  4. Run connect-server ip-address

    A candidate PCE server is specified for the PCE client.

  5. Run commit

    The configuration is committed.

Parent Topic: Configuring an IS-IS SR-MPLS TE Tunnel (Path Computation on the Controller)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >