Configuring the UCMP Function of the SR-MPLS TE Tunnel

When multiple SR-MPLS TE tunnels are directed to the downstream device, the load balancing weights can be configured to perform the Unequal Cost Multi-Path Load Balance (UCMP) on the SR-MPLS TE tunnels.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run load-balance unequal-cost enable

    UCMP is enabled globally.

  3. Run interface tunnel tunnel-number

    The SR-MPLS TE tunnel interface view is displayed.

  4. Run load-balance unequal-cost weight weight

    A weight is set for an SR-MPLS TE tunnel before UCMP is carried out among tunnels.

  5. Run commit

    The configuration is committed.

Parent Topic: Configuring an IS-IS SR-MPLS TE Tunnel (Path Computation on the Controller)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >