Verifying the CR-LSP Backup Configuration

After configuring CR-LSP backup, you can view information about backup CR-LSPs.

Prerequisites

CR-LSP backup has been configured.

Procedure

Run the display mpls te tunnel-interface command to check information about a tunnel interface on the ingress of a tunnel.
Run the display mpls te hot-standby state { all [ verbose ] | interface tunnel-interface-name } command to check information about the hot-standby status.

Parent Topic: Configuring CR-LSP Backup

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic