Enabling P2MP TE Globally

This section describes how to enable P2MP TE globally on each node before a P2MP TE tunnel is established.

Context

You can configure a P2MP TE tunnel only after P2MP TE is globally enabled on each node.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls te

    MPLS TE is enabled.

  4. Run mpls te p2mp-te

    P2MP TE is globally enabled.

  5. Run commit

    The configuration is committed.

Parent Topic: Configuring P2MP TE Tunnels
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >