You can disable P2MP TE on a specific interface during the network planning.
After P2MP TE is globally enabled, P2MP TE is automatically enabled on each MPLS TE-enabled interface on a local node. To disable P2MP TE on a specific interface during network planning or there is no need to have P2MP TE enabled on a specific interface because it does not support P2MP forwarding, disable P2MP TE on the specific interface.
The system view is displayed.
The interface view is displayed.
P2MP TE is disabled on the interface.
After the mpls te p2mp-te disable command is run, P2MP TE LSPs established on the interface are torn down, and newly configured P2MP TE LSPs on the interface fail to be established.
The configuration is committed.