Configuring a VPWS PW

Procedure

1. Run system-view

   The system view is displayed.

2. Run mpls l2vpn

   MPLS L2VPN is enabled.

3. Run quit

   Return to the system view.

4. Run interface interface-type interface-number [ .subinterface-number ]

   The AC interface view is displayed.

5. (Optional) Run mpls l2vpn description description-text

   An L2VPN description is configured for the AC interface.

6. Run one of the following commands to create a VPWS PW according to the interface type:

   • Ethernet interface:

     mpls static-l2vc { { destination ip-address | pw-template pw-template-name vc-id } ^* | destination ip-address [ vc-id ] } transmit-vpn-label transmit-label-value receive-vpn-label receive-label-value [ tunnel-policy tnl-policy-name [ endpoint endpoint-address color color-value ] | access-port | [ control-word | no-control-word ] | [ raw | tagged | ip-interworking ] ] ^*

7. (Optional) Run mpls l2vpn service-name service-name

   An L2VPN service name is specified. The L2VPN service can then be maintained through an NMS based on the specified name.

8. Run commit

   The configuration is committed.