Configuring VPWS IP Interworking

If AC types at the two ends of a VPWS PW are different, configure VPWS IP interworking for the two CEs to communicate.

Context

Perform the following configurations on the endpoint PEs of a PW.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls l2vpn

    MPLS L2VPN is enabled.

  3. Run quit

    Return to the system view.

  4. Run interface interface-type interface-number [ .subinterface-number ]

    The AC interface view is displayed.

  5. Run following command to create a VPWS PW according to the interface type:

    Ethernet interface:

    mpls static-l2vc { { destination ip-address | pw-template pw-template-name vc-id } * | destination ip-address [ vc-id ] } transmit-vpn-label transmit-label-value receive-vpn-label receive-label-value [ tunnel-policy tnl-policy-name [ endpoint endpoint-address color color-value ] | access-port | [ control-word | no-control-word ] | [ raw | tagged | ip-interworking ] ] * ip-interworking

  6. (Optional) Run mpls l2vpn service-name service-name

    An L2VPN service name is specified. The L2VPN service can then be maintained through an NMS based on the specified name.

  7. Run commit

    The configuration is committed.

Parent Topic: Configuring SVC VPWS
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >