display card port-config-mode configuration

Function

The display card port-config-mode configuration command displays information about the card interface working mode.

Only the following switch models support this command:

S5731-H24T4XC, S5731-H24P4XC, S5731-H48T4XC, and S5731-H48P4XC
S5731S-H24T4XC-A and S5731S-H48T4XC-A
S5732-H24UM2CC and S5732-H48UM2CC

Format

display card port-config-mode configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To check the card interface working mode or check whether the card interface working mode configured using the set card port-config-mode 25g-port enable command takes effect, run the display card port-config-mode configuration command.

Example

# Display information about the card interface working mode.

<HUAWEI> display card port-config-mode configuration    
-----------------------------------                                                                                                 
 SlotId       Current       Next                                                                                                    
-----------------------------------                                                                                                 
 1            8*10G         8*10G                                                                                                   
-----------------------------------

**Table 1** Description of the **display card port-config-mode configuration** command output
Item	Description
SlotId	Slot ID.
Current	Current interface working mode. NOTE: (*) indicates that the S7X08000 card is not properly installed or does not support the change of the port working mode.
Next	Interface working mode used at the next startup. NOTE: (*) indicates that the S7X08000 card is not properly installed or does not support the change of the port working mode.