display device group-speed configuration

Function

The display device group-speed configuration command displays information about the rate of interfaces in MultiGE interface groups.

This command is supported only on the following switch models:

S5732-H24UM2CC and S5732-H48UM2CC

Format

display device group-speed configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the following information:

Default maximum rates of interfaces in MultiGE interface groups
Maximum rates of interfaces in MultiGE interface groups, which are configured using the assign group-speed command
Maximum rates of interfaces in MultiGE interface groups during the current device startup
Maximum rates of interfaces in MultiGE interface groups for the next device startup

Example

# Display the rates of interfaces in MultiGE interface groups.

<HUAWEI> display device group-speed configuration                               
Slot Group  Interfaces            BaseSpeed ConfigSpeed CurrentSpeed NextSpeed                                                      
-------------------------------------------------------------------------------                                                     
 0    0    MultiGE0/0/1  ~ 0/0/12   1G        -           1G           1G                                                           
      1    MultiGE0/0/13 ~ 0/0/24   1G        2.5G        2.5G         2.5G                                                         
      2    MultiGE0/0/25 ~ 0/0/36   1G        5G          5G           5G                                                           
      3    MultiGE0/0/37 ~ 0/0/48   1G        10G         10G          10G

**Table 1** Description of the **display device group-speed configuration** command output
Item	Description
Slot	Slot ID.
Group	Number of a MultiGE interface group.
Interfaces	Interface number.
BaseSpeed	Default maximum rates of interfaces in MultiGE interface groups The unit is bit/s.
ConfigSpeed	Maximum rates of interfaces in MultiGE interface groups, which are configured using the assign group-speed command The unit is bit/s. NOTE: If this field displays -, ConfigSpeed is the same as BaseSpeed.
CurrentSpeed	Maximum rates of interfaces in MultiGE interface groups during the current device startup The unit is bit/s.
NextSpeed	Maximum rates of interfaces in MultiGE interface groups for the next device startup The unit is bit/s.