CLKMIB_1.3.6.1.4.1.2011.5.25.186.1.8.13 hwClockSourceFreqCheckResume

Description

CLKMIB/4/CLOCKSOURCEFREQCHECKRESUME:OID [oid] The check of frequence normal notification. (hwClockSrcCfgChassisIndex=[integer], hwClockSrcCfgSourceTypeIndex=[integer], hwClockSrcCfgSourceIndex=[integer], hwClockChassisId=[integer], hwClockCurSourceName=[STRING], hwClockSrcCfgFreqCheckResult=[integer])

The alarm generated when the frequency offset detection functioned abnormally was cleared.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.186.1.8.13	Warning	environmentalAlarm(5)

Parameters

Name	Meaning
[oid]	Indicates the MIB object ID of the alarm.
hwClockSrcCfgChassisIndex	Index of the chassis where the clock source resides. The index is always 1 for a single chassis.
hwClockSrcCfgSourceTypeIndex	Index of the clock source type. The value can be: System(1): System PLL sync2M-1(2): 2M PLL-1 sync2M-2(3): 2M PLL-2
hwClockSrcCfgSourceIndex	Index of the clock source
hwClockChassisId	ID of the chassis
hwClockCurSourceName	Name of the current clock source
hwClockSrcCfgFreqCheckResult	Result of frequency offset detection.

Impact on the System

None.

Possible Causes

When the absolute frequency offset value of the tracking source changes from above 9.2 ppm to below 8.7 ppm, the clearance of the alarm generated when the frequency offset detection functioned abnormally is reported.

Procedure

This alarm is informational only, and no action is required.

Related Information

CLKMIB_1.3.6.1.4.1.2011.5.25.186.1.8.5 hwClockSourceFreqCheck