CLKMIB_1.3.6.1.4.1.2011.5.25.186.1.8.14 hwClockSourceOutputBelowThresholdResume

Description

CLKMIB/4/CLOCKSOURCEOUTPUTABOVETHRESHOLD:OID [oid] The SSM of output above threshold notification. (hwClockAttributeChassisIndex=[integer], hwClockChassisId =[integer], hwClockPllId=[integer], hwClockAttributeOutThreshold=[integer], hwClockAttributeOutValue=[integer], hwClockCurSourceName=[STRING])

The alarm generated when the frequency offset detection functioned abnormally was cleared.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.186.1.8.14	Warning	environmentalAlarm(5)

Parameters

Name	Meaning
[oid]	Indicates the MIB object ID of the alarm.
hwClockAttributeChassisIndex	Index of the chassis where the clock source resides. The index is always 1 for a single chassis.
hwClockChassisId	Chassis where the clock source resides.
hwClockPllId	ID of the clock source type. The value can be: System(1): System PLL sync2M-1(2): 2M PLL-1 sync2M-2(3): 2M PLL-2
hwClockAttributeOutThreshold	Lower threshold for the quality level of the clock signals output by the external clock. The value can be: 2: prc; 4: ssua; 8: ssub; 11: sec; 15: dnu. The default SSM level corresponding to the lower threshold is dnu. The SSM level can be configured as prc, sec, ssua, or ssub.
HwClockAttributeOutValue	Quality level of the clock signals output by the external clock. The value can be: 2: prc; 4: ssua; 8: ssub; 11: sec; 15: dnu.
hwClockCurSourceName	Name of the current clock source

Impact on the System

None.

Possible Causes

When the SSM level of the clock signals output by the external clock is higher than the lower threshold, the alarm clearance is reported.

Procedure

This alarm is informational only, and no action is required.

Related Information

CLKMIB_1.3.6.1.4.1.2011.5.25.186.1.8.6 hwClockSourceOutputBelowThreshold