EOAM_Y1731_1.3.6.1.4.1.2011.5.25.136.1.6.24 hwCfmVlanOnewayDelayRecovery

Description

EOAM_Y1731/4/VLAN_1DM_UNDER_THRESHOLD:OID [OID] The result of one-way delay-measure is under the threshold. (MdIndex=[GAUGE], MaIndex=[GAUGE], RemoteMacAddress=[OPAQUE], Timestamp=[TIMETICK], DelayValue=[GAUGE], ThresholdValue=[GAUGE])

In the VLAN networking where one-way frame delay measurement was enabled and an expected alarm threshold was set, if the network delay fell below the alarm threshold and a one-way frame alarm had been generated, a clear alarm was generated.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.136.1.6.24	Warning	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
MdIndex	Index of the MD where a one-way frame delay alarm is cleared
MaIndex	Index of the MA where a one-way frame delay alarm is cleared
RemoteMacAddress	Source MAC address contained in the 1DM frame received by the local end from the remote end
Timestamp	Timestamp indicating the time when a one-way frame delay alarm is cleared
DelayValue	Delay when a one-way frame delay alarm is cleared
ThresholdValue	An alarm threshold for one-way frame delay measurement

Impact on the System

Services will not be affected.

Possible Causes

The device in VLAN networking was enabled with one-way frame delay measurement and was configured with an expected alarm threshold, the network delay fell below the alarm threshold and a one-way frame delay alarm had been generated.

Procedure

This alarm message is informational only, and no action is required.