HTTP2C/3/SET_SESSION_FAILED

Message

HTTP2C/3/SET_SESSION_FAILED: Failed to set the HTTP2.0 session table. (Reason = [STRING], Error = [STRING], AppType = [STRING])

Setting an HTTP2.0 session table failed.

Parameter Name	Parameter Meaning
Reason	Failure cause: Invalid argument: Incorrect parameter Out of memory: Insufficient memory
Error	Error code. Common error codes are as follows: -501: Invalid argument -901: Out of memory
AppType	Channel type: 1: Authentication channel, which is established with the controller for authentication. 2: Performance reporting channel, which is established with the controller for performance reporting. 3: Registration center channel, which is established with eSight for registration center query. 4: Performance reporting channel, which is established with the IES for performance reporting. 5: Service channel, which is established with the controller for IP-group message exchange.

Parameter Name

Parameter Meaning

Reason

Failure cause:

Error

Error code. Common error codes are as follows:

AppType

Channel type:

1: Authentication channel, which is established with the controller for authentication.
2: Performance reporting channel, which is established with the controller for performance reporting.
3: Registration center channel, which is established with eSight for registration center query.
4: Performance reporting channel, which is established with the IES for performance reporting.
5: Service channel, which is established with the controller for IP-group message exchange.