POE/4/POECHIPFAULT

Message

POE/4/POECHIPFAULT: PoE chip fault. (SlotID=[ULONG], ChipID=[ULONG])

The PoE chip is faulty.

Parameter Name	Parameter Meaning
SlotID	Indicates the slot ID.
ChipID	Indicates the chip ID.

The PoE chip is faulty.

Run the reset poe { all chips | chip chip-id } slot slot-id command to reset the PoE chip and check whether the log is generated again.
- If so, go to step 2.
- If not, no further action is required.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.