Default Settings for HQoS

Table 1 describes default settings of a flow queue WRED drop profile; Table 2 describes default settings of a flow queue profile; Table 3 describes default settings of a flow mapping profile; Table 4 describes the mapping between internal priorities and flow queues, which cannot be changed.

**Table 1** Default settings of a flow queue WRED drop profile
Parameter	Default Setting
Flow queue WRED drop profile name	default
Lower drop threshold (red, yellow, and green packets)	100
Upper drop threshold (red, yellow, and green packets)	100
Maximum drop probability (red, yellow, and green packets)	100

**Table 2** Default settings of a flow queue profile
Parameter	Default Setting
Flow queue profile name	default
Queue scheduling mode	PQ scheduling
Traffic shaping rate	PIR
WRED drop profile	default

**Table 3** Default settings of a flow mapping profile
Parameter	Default Setting
Flow mapping profile name	default
Queue mapping	Flow queues 0 to 7 corresponding to port queues 0 to 7 respectively

**Table 4** Mappings between internal priorities and flow queues
Internal Priority	Flow Queue Index
BE	0
AF1	1
AF2	2
AF3	3
AF4	4
EF	5
CS6	6
CS7	7