<
Home
Configuring Martini VPLS
Pre-configuration Task
Before configuring Martini VPLS, complete the following tasks:
Configure LSR IDs and enabling MPLS on PEs and Ps.
Enable MPLS L2VPN on PEs.
Establish tunnels between PEs for data transmission.
Set up an LDP session if PEs are indirectly connected.
Configuration Procedure
To configure Martini VPLS, perform the following configurations on PEs at both ends of a PW.
Creating a VSI and Configuring LDP Signaling
Binding VSIs to AC Interfaces
(Optional) Configuring Forwarding Isolation Between AC Interfaces
Verifying the Martini VPLS Configuration