led off

Function

The led off command configures AP indicators to turn off or turn off during the specified time range.

The undo led off command restores the default settings.

By default, AP indicators are allowed to turn on.

Format

led off

undo led off

Parameters

None.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Blinking indicators of indoor APs deployed in hospitals and hotels may affect people's nighttime rest. To prevent this, run the led off command to configured AP indicators to turn off or turn off during the specified time range.

If you need to locate AP faults by observing AP indicator status, run the undo led off command to allow the AP indicators to turn on.

Precautions

The configuration performed using the led blink-time command takes precedence over that performed using the led off command. That is, if AP indicators are configured to blink and to turn off or turn off during the specified time range, the configuration performed using the led off command takes effect after the RU indicators blink.

Example

# Configure AP indicators to turn off.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] led off