CLKM_1.3.6.1.4.1.2011.5.25.186.1.8.5 hwClockSourceFreqCheck

Trap Buffer Description

The check of frequence abnormal notification. (hwClockSrcCfgChassisIndex=[hwClockSrcCfgChassisIndex], hwClockSrcCfgSourceTypeIndex=[hwClockSrcCfgSourceTypeIndex], hwClockSrcCfgSourceIndex=[hwClockSrcCfgSourceIndex], hwClockChassisId=[hwClockChassisId], hwClockSrcCfgFreqCheckResult=[hwClockSrcCfgFreqCheckResult], hwClockSrcCfgSourceDescr=[hwClockSrcCfgSourceDescr])

The frequency offset detection functioned abnormally.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwClockSourceFreqCheck
Trap OID	1.3.6.1.4.1.2011.5.25.186.1.8.5
MIB	HUAWEI-CLOCK-MIB
Alarm ID	0x09af0003
Alarm Name	hwClockSourceFreqCheck
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	CLKM_1.3.6.1.4.1.2011.5.25.186.1.8.13 hwClockSourceFreqCheckResume

Trap Buffer Parameters

Parameter	Description
hwClockSrcCfgChassisIndex	Indicates the index of the chassis where the non-PTP clock source is located. In the case of a single chassis, the index is 1. For a chassis where a PTP clock source is located, the index is invalid.
hwClockSrcCfgSourceTypeIndex	Index of the clock source type. values: bits(1). ptp(2). interface(3). cesacr(4).
hwClockSrcCfgSourceIndex	Index of the clock source.
hwClockChassisId	Chassis id.
hwClockSrcCfgFreqCheckResult	Result of the check of frequency, values: abnormal(0). normal(1).
hwClockSrcCfgSourceDescr	The description of clock source.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.186.1.7.4	hwClockChassisId	-
1.3.6.1.4.1.2011.5.25.186.1.11.1.4	hwClockSrcCfgSourceDescr	hwClockSrcCfgChassisIndex hwClockSrcCfgSourceTypeIndex hwClockSrcCfgSourceIndex
1.3.6.1.4.1.2011.5.25.186.1.11.1.12	hwClockSrcCfgFreqCheckResult	hwClockSrcCfgChassisIndex hwClockSrcCfgSourceTypeIndex hwClockSrcCfgSourceIndex

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.186.1.7.4

hwClockChassisId

-

1.3.6.1.4.1.2011.5.25.186.1.11.1.4

hwClockSrcCfgSourceDescr

hwClockSrcCfgChassisIndex

hwClockSrcCfgSourceTypeIndex

hwClockSrcCfgSourceIndex

1.3.6.1.4.1.2011.5.25.186.1.11.1.12

hwClockSrcCfgFreqCheckResult

hwClockSrcCfgChassisIndex

hwClockSrcCfgSourceTypeIndex

hwClockSrcCfgSourceIndex

Procedure

1. Run the display clock source command to check the current status of the clock source.

If the clock source is in the abnormal state, go to Step 2.
If the clock source is in the normal state, go to Step 5.

2. Run the display clock config command to check whether the frequency offset detection is enable.

If the frequency offset detection is enable, go to Step 3.
If the frequency offset detection is not enable, go to Step 5.

3. Run the clock freq-deviation recover command in the interface viewer to check whether the clock can be resumed.

If the clock can be resumed, go to Step 4.
If the clock can not be resumed, go to Step 5.

4. Check whether the alarm is cleared.

If the alarm is cleared, go to step 6.
If the alarm is not cleared, go to step 5.

5. Collect the trap information, log information, and configuration of the router, and contact Huawei technical personnel.

6. End.