LACP_1.3.6.1.4.1.2011.5.25.41.3.3 hwLacpTotalLinkLoss

Trap Buffer Description

Link bandwidth lost totally. (TrunkIndex=[TrunkIndex], TrunkIfIndex=[TrunkIfIndex], TrunkId=[TrunkId], TrunkName=[TrunkName], Reason=[ReasonCode])

All the link bandwidths were lost.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwLacpTotalLinkLoss
Trap OID	1.3.6.1.4.1.2011.5.25.41.3.3
MIB	HUAWEI-IF-EXT-MIB
Alarm ID	0x09360001
Alarm Name	hwLacpTotalLinkLoss
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	LACP_1.3.6.1.4.1.2011.5.25.41.3.14 hwLacpTotalLinkLossResume

Trap Buffer Parameters

Parameter	Description
TrunkIndex	Index of a trunk
TrunkIfIndex	Index of a trunk interface
TrunkId	ID of a trunk interface
TrunkName	Name of a trunk interface
ReasonCode	Reason why all the link bandwidths were lost or resumed.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2	hwTrunkIfID	hwTrunkIndex
1.3.6.1.2.1.31.1.1.1.1	ifName	ifIndex

Procedure

1. Run the display interface brief command to check whether the interface is Down.

If so, go to Step 2.
If not, go to Step 4.

2. Run the undo shutdown command to check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 3.

3. Check whether the physical link is faulty.

If so, go to Step 5.
If not, go to Step 4.

4. Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check whether there are member interfaces in the LAG.

If so, go to Step 7.
If not, go to Step 6.

5. Repair the physical link and then check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 4.

6. Run the eth-trunk trunk-id command in the interface view and add the current Ethernet interface to the Eth-Trunk interface as required. Then, check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 7.

7. Collect alarm information and configuration information, and then contact technical support personnel.

8. End.