BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.25 hwIPPoolDAPDeviceSubnetFull
Trap Buffer Description
The number of address segments dynamically allocated to the device reached the maximum number allowed.(UP-Group=[UpGroup])
The number of address segments requested by all dynamic address pools reached the threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwIPPoolDAPDeviceSubnetFull |
Trap OID |
1.3.6.1.4.1.2011.6.8.2.2.0.25 |
MIB |
HUAWEI-IPPOOL-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
UpGroup |
Indicates the index of a vBRAS-UP group. If the value of UP-Group is 0, no vBRAS-UP group exists. |
VB Parameters
None
Procedure
1. Replan the dynamic address pool.
- If the alarm persists, go to Step 2.
- If the alarm is cleared, go to Step 3.
2. Collect trap, log, and configuration information, and contact Huawei technical support personnel.
3. End.