clock wtr

Function

The clock wtr command configures a WTR time for a status change after a clock source is restored.

The default WTR time is 5 minutes.

Format

clock wtr wtr-time

Parameters

Parameter	Description	Value
wtr wtr-time	Specifies the WTR time for a status change after a clock source is restored.	The value ranges from 0 to 12, in minutes. The default WTR time is 5 minutes. The step is 1 minute.

Parameter

Description

Value

wtr wtr-time

Specifies the WTR time for a status change after a clock source is restored.

The value ranges from 0 to 12, in minutes. The default WTR time is 5 minutes. The step is 1 minute.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
clksync	write

Usage Guidelines

Usage Scenario

When the NetEngine 8000 F detects that the clock source is restored from abnormal to normal, it updates the status information in the display clock source command output only after a configured WTR time. You can configure an appropriate WTR time to reduce the effect of frequent clock source status changes on clock source selection.

In VS mode, this command is supported only by the admin VS.

Example

# Set the WTR time for a status change after a clock source is restored to 6 minutes.

<HUAWEI> system-view
[~HUAWEI] clock wtr 6