display remote-backup-profile slave

Function

The display remote-backup-profile slave command displays configuration and state information about a specified remote backup profile (RBP) on the slave main control board.

This command is supported only on the NetEngine 8000 F1A.

Format

display remote-backup-profile slave [ profile-name ]

Parameters

Parameter	Description	Value
profile-name	Specifies the name of an RBP.	The value is a string of 1 to 128 characters.
slave	slave board.	-

Parameter

Description

Value

profile-name

Specifies the name of an RBP.

The value is a string of 1 to 128 characters.

slave

slave board.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
rbs	read

Usage Guidelines

Usage Scenario

To check configuration and state information about a specified RBP on the slave main control board, run the display remote-backup-profile slave command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display configuration and state information about a specified RBP on the slave main control board.

<HUAWEI> system-view
[~HUAWEI] display remote-backup-profile slave p1
-----------------------------------------------
 Profile-Index        : 0x1000
 Profile-Name         : p1
 Service              : bras 
 Remote-backup-service: --
 Backup-ID            : --
 track protocol       : --
 Interface            :
 Backup mode          : hot
 Slot-Number          : --
 Card-Number          : --
 Port-Number          : --
 Traffic threshold    : 50(MB)
 Traffic interval     : 10(minutes)
 ipv6 pool include info :
 ipv6 pool ddd include  : pool pd (20)          
 Forwarding Configured: Slave Forwarding

**Table 1** Description of the **display remote-backup-profile slave** command output
Item	Description
Profile-Index	RBP index.
Profile-Name	RBP name.
Service	Service type.
Backup-ID	Remote backup ID. The same remote backup ID must be configured on two devices working in dual-device hot backup mode.
track protocol	Type of the tracked protocol.
Interface	Interface bound to the RBP.
Backup mode	Backup mode.
Slot-Number	Slot ID.
Card-Number	Subcard number.
Port-Number	Interface number.
Traffic threshold	Threshold over which traffic is backed up.
Traffic interval	Interval at which traffic is backed up.
ipv6 pool include info	Mapping information of the IPv6 address pool bound to the RBP.
Forwarding Configured	Backup device flag: Slave Forwarding. Slave Without-forwarding.
Remote-backup-service	RBS bound to the RBP.