emdi bind channel-group lpu-group

Function

The emdi bind channel-group lpu-group command binds an EMDI channel group and a board group.

The undo emdi bind channel-group lpu-group command cancels the binding relationship between an EMDI channel group and a board group.

The emdi bind channel-group lpu-group outbound command binds an EMDI channel group to an EMDI board group in the downstream direction.

The undo emdi bind channel-group lpu-group outbound command unbinds an EMDI channel group from an EMDI board group in the downstream direction.

By default, an EMDI channel group is not bound to an EMDI board group in either the upstream or downstream direction.

This command is supported only on the NetEngine 8000 F1A.

Format

emdi bind channel-group channel-group-name lpu-group lpu-group-name

emdi bind channel-group channel-group-name lpu-group lpu-group-name outbound

undo emdi bind channel-group channel-group-name lpu-group lpu-group-name

undo emdi bind channel-group channel-group-name lpu-group lpu-group-name outbound

Parameters

Parameter	Description	Value
channel-group-name	Specifies the name of an EMDI channel group.	The name is a string of 1 to 31 case-sensitive characters, spaces not supported.
lpu-group-name	Specifies the name of a board group.	The name is a string of 1 to 31 case-sensitive characters, spaces not supported.
outbound	Binds an EMDI channel group to an EMDI board group in the downstream direction.	-

Parameter

Description

Value

channel-group-name

Specifies the name of an EMDI channel group.

The name is a string of 1 to 31 case-sensitive characters, spaces not supported.

lpu-group-name

Specifies the name of a board group.

The name is a string of 1 to 31 case-sensitive characters, spaces not supported.

outbound

Binds an EMDI channel group to an EMDI board group in the downstream direction.

Views

EMDI view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
emdi	write

Usage Guidelines

Usage Scenario

When the upstream EMDI detection solution is used, after the EMDI channels and boards to be detected are configured, run the emdi bind channel-group lpu-group command to bind the EMDI channel group to the EMDI board group in the upstream direction to detect indicators of a specified channel.

When the downstream EMDI detection solution is used, after the EMDI channels and boards to be detected are configured, run the emdi bind channel-group lpu-group outbound command to bind the EMDI channel group to the EMDI board group in the downstream direction to detect indicators of a specified channel.

Prerequisites

An EMDI channel group has been created using the emdi channel-group command and a board group has been created using the emdi lpu-group command.

Precautions

One EMDI channel group can be bound to an EMDI board group in both the upstream and downstream directions or to two EMDI board groups, one in the upstream direction and the other in the downstream direction.

Example

# Bind EMDI channel group 1 to EMDI board group 1 in the downstream direction.

<HUAWEI> system-view
[~HUAWEI] emdi
[~HUAWEI-emdi] emdi bind channel-group 1 lpu-group 1 outbound

# Bind EMDI channel group 1 to EMDI board group 1 in the upstream direction.

<HUAWEI> system-view
[~HUAWEI] emdi
[~HUAWEI-emdi] emdi bind channel-group 1 lpu-group 1