esqm protocol disable

Function

The esqm protocol disable command disables a device from performing ESQM for Stream Control Transmission Protocol (SCTP) or GPRS Tunneling Protocol (GTP) packets.

The undo esqm protocol disable command enables a device to perform ESQM for SCTP, or GTP packets.

By default, after ESQM is enabled on a device, the device performs ESQM for SCTP and GTP packets.

This command is supported only on the NetEngine 8000 F1A.

Format

esqm protocol { sctp | gtp } disable

undo esqm protocol { sctp | gtp } disable

Parameters

Parameter	Description	Value
sctp	Configures the constructing flow and sampling of sctp.	-
gtp	Configures the constructing flow and sampling of gtp.	-

Parameter

Description

Value

sctp

Configures the constructing flow and sampling of sctp.

gtp

Configures the constructing flow and sampling of gtp.

Views

Enhanced stream quality monitoring view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
esqm	write

Usage Guidelines

Usage Scenario

After ESQM is enabled on a device, the device performs ESQM for SCTP and GTP packets by default. To disable the device from performing ESQM for packets of one or more of SCTP and GTP, run the esqm protocol disable command.

Example

# Disable a device from performing ESQM for SCTP packets.

<HUAWEI> system-view
[~HUAWEI] esqm
[~HUAWEI-esqm] esqm protocol sctp disable