http-redirect

Function

The http-redirect command redirects login users to an authentication web page.

The undo http-redirect command cancels the configuration.

By default, the http redirect function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

http-redirect [ plus ]

undo http-redirect [ plus ]

Parameters

Parameter	Description	Value
plus	Http redirect plus.	-

Parameter

Description

Value

plus

Http redirect plus.

Views

Traffic behavior view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
portal	write

Usage Guidelines

Usage Scenario

To redirect login users to an authentication web page, run the http-redirect command. Running the http-redirect command implements redirection functions:

After users go online, the redirection web page is displayed for forcible advertisement push.
After web users go online, users can only access the web server or limited resources in the pre-authentication domain.
The web process is reused to limit users to access specified network resources. When users access other resources, a prompt page is displayed.
The web address forcibly pushed to users is configured in the user online domain.

Prerequisites

User online settings are completed. The web address forcibly pushed to users has been configured in the user online domain.
The http-redirect command has been configured in the traffic behavior profile.
When using traffic classification to define a redirection web page, run the rule command to configure the advanced ACL rule to match the port number associated with the HTTP address.

Precautions

The policy-based routing and BRAS redirection are mutually exclusive in one traffic behavior.

The configured web page is only pushed to users after the http-redirect command is configured.

If the AAA domain configured the IPv4 and IPv6 address of Portal Server, without user web address, the user web address will not be matched after IPv6 address matched. That may be led to The web address forcibly pushed to users failed.

Example

# Redirect a user to the authentication web page.

<HUAWEI> system-view
[~HUAWEI] traffic behavior b1
[~HUAWEI-behavior-b1] http-redirect