nqa ipfpm dcp

Function

The nqa ipfpm dcp command enables DCP globally and displays the IPFPM-DCP view.

The undo nqa ipfpm dcp command disables DCP globally.

By default, DCP is disabled globally.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

nqa ipfpm dcp

undo nqa ipfpm dcp

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipfpm	write

Usage Guidelines

Usage Scenario

To enable DCP globally so that IP FPM performance statistics can be implemented, run the nqa ipfpm dcp command. A DCP manages and controls TLPs, collects statistics generated by TLPs, and reports the statistics to an MCP.

Follow-up Procedure

Run the dcp id command to configure a DCP ID.

Precautions

DCP and MCP functionalities can be configured on the same device.

Example

# Enable DCP globally and display the IPFPM-DCP view.

<HUAWEI> system-view
[~HUAWEI] nqa ipfpm dcp
[*HUAWEI-nqa-ipfpm-dcp]