l2tp icrq-limit

Function

The l2tp icrq-limit command configures the maximum number of ICRQ packets that the LNS can process per second.

The undo l2tp icrq-limit command restores the default configuration.

By default, there is no limit on the number of ICRQ packets that the LNS can process per second.

This command is supported only on the NetEngine 8000 F1A.

Format

l2tp icrq-limit limit-value

undo l2tp icrq-limit [ limit-value ]

Parameters

Parameter	Description	Value
limit-value	Specifies the maximum number of ICRQ packets that the LNS can process per second.	The value is an integer ranging from 1 to 60000.

Parameter

Description

Value

limit-value

Specifies the maximum number of ICRQ packets that the LNS can process per second.

The value is an integer ranging from 1 to 60000.

Views

Slot view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

If a large number of users are going online in a period of time, too many ICRQ packets may be sent, causing subsequent users to fail to go online. To limit the number of ICRQ packets that the LNS can process per second, run the l2tp icrq-limit command.

Example

# Configure the LNS to process a maximum of 200 ICRQ packets per second.

<HUAWEI> system-view
[~HUAWEI] slot 1
[*HUAWEI-slot-1] l2tp icrq-limit 200