minimal available bandwidth

Function

The minimal available bandwidth command configures the minimum available bandwidth ratio for a FlexE client.

The undo minimal available bandwidth command cancels the minimum available bandwidth ratio configured for a FlexE client.

By default,the minimum available bandwidth ratio of a FlexE client is 0.

This command is supported only on the NetEngine 8000 F2A.

Format

minimal available bandwidth percent

undo minimal available bandwidth [ percent ]

Parameters

Parameter	Description	Value
percent	Indicates the minimum available bandwidth ratio.	The value is an integer that ranges from 1 to 100.

Parameter

Description

Value

percent

Indicates the minimum available bandwidth ratio.

The value is an integer that ranges from 1 to 100.

Views

FlexE Client View

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
device-mgr	write

Usage Guidelines

Usage Scenario

To ensure that a FlexE client works properly, run the minimal available bandwidth command to configure the minimum available bandwidth ratio for the interface. If the available bandwidth ratio is less than the configured minimum available bandwidth ratio, the interface is Down. If the available bandwidth is greater than or equal to the configured minimum available bandwidth ratio, the interface is Up.

Example

# Cancel the configuration of the minimum available bandwidth percentage for the FlexE client 1.

<HUAWEI> system-view
[~HUAWEI] flexe client-instance 1
[~HUAWEI-flexe-client-1] undo minimal available bandwidth

# Set the minimum available bandwidth percentage of FlexE client 1 to 25%.

<HUAWEI> system-view
[~HUAWEI] flexe client-instance 1
[~HUAWEI-flexe-client-1] minimal available bandwidth 25