nat alarm user-table disable

Function

The nat alarm user-table disable command disables the trap or log alarm function for user tables.

The undo nat alarm user-table disable command enables the trap or log alarm function for user tables.

By default, the trap and log alarm function for user tables are enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

nat alarm user-table log disable

nat alarm user-table trap disable

undo nat alarm user-table log disable

undo nat alarm user-table trap disable

Parameters

Parameter	Description	Value
trap	Disables or enables the trap function for user tables.	-
log	Enables or disables the log function for the number of user tables.	-

Parameter

Description

Value

trap

Disables or enables the trap function for user tables.

log

Enables or disables the log function for the number of user tables.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

To disable the trap or log alarm function for user tables, run the nat alarm user-table disable command.

You can use the nat alarm user-table { log | trap } disable command to enable or disable the function of sending and logging the user table threshold alarm, but cannot control the user table exhaustion alarm and log function.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the log function for user tables.

<HUAWEI> system-view
[~HUAWEI] nat alarm user-table log disable