radius-attribute framed-route support default-route

Function

The radius-attribute framed-route support default-route command enables the device to generate a default route based on the route carried in the Framed-Route attribute delivered by the RADIUS server.

The undo radius-attribute framed-route support default-route command restores the default configuration.

By default, the device does not generate a default route based on the route carried in the Framed-Route attribute delivered by the RADIUS server.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute framed-route support default-route

undo radius-attribute framed-route support default-route

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

To enable the device to generate a default route based on the route carried in the Framed-Route attribute delivered by the RADIUS server, run the radius-attribute framed-route support default-route command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the device to generate a default route based on the route carried in the Framed-Route attribute delivered by the RADIUS server.

<HUAWEI> system-view
[~HUAWEI] radius-attribute framed-route support default-route