radius-server group

Function

The radius-server group command binds a RADIUS server group to a dynamic address pool.

The undo radius-server group command unbinds a RADIUS server group from a dynamic address pool.

By default, a dynamic address pool does not have any RADIUS server group bound.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server group groupname

undo radius-server group groupname

Parameters

Parameter	Description	Value
groupname	Specifies a RADIUS server group for a dynamic address pool.	The value is a string of 1 to 32 case-insensitive characters, which can be uppercase letters A to Z, lowercase letters a to z, digits 0 to 9, periods (.), hyphens (-), or underscores (_).

Parameter

Description

Value

groupname

Specifies a RADIUS server group for a dynamic address pool.

The value is a string of 1 to 32 case-insensitive characters, which can be uppercase letters A to Z, lowercase letters a to z, digits 0 to 9, periods (.), hyphens (-), or underscores (_).

Views

IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

After a dynamic address pool is configured, run the radius-server group command to bind a RADIUS server group to the dynamic address pool so that dynamic address segments can be delivered.

Precautions

The RADIUS server group to be bound to the dynamic address pool must have been configured.

Example

# Bind the RADIUS server group isp1 to the dynamic address pool test.

<HUAWEI> system-view
[~HUAWEI] radius-server group isp1
[*HUAWEI-radius-isp1] commit
[~HUAWEI-radius-isp1] quit
[~HUAWEI] ip pool test bas dynamic
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] radius-server group isp1