The rebinding-time command configures the rebinding time of an IP address.
The undo rebinding-time command restores the default setting.
By default, the rebinding time of an IP address is 87.5% of the lease of the address pool.
This command is supported only on the NetEngine 8000 F1A.
Parameter | Description | Value |
---|---|---|
days |
Specifies the number of days for IP address rebinding. |
The value is an integer that ranges from 0 to 999. |
hours |
Specifies the number of hours for IP address rebinding. |
The value is an integer that ranges from 0 to 23. |
minutes |
Specifies the number of minutes for IP address rebinding. |
The value is an integer that ranges from 0 to 59. |
Usage Scenario
The rebinding time of an IP address must be shorter than the lease of the address pool and longer than the lease of the IP address.
If the value of rebinding time is set to 0 after the rebinding-time command is configured, the value of rebinding time restores the default value. If the rebinding-time command is not configured, setting the value of rebinding time to 0 is meaningless.Precautions
In VS mode, this command is supported only by the admin VS.