reset loop-detect trigger trigger-down

Function

The reset loop-detect trigger trigger-down command blocks the Down state of all interfaces or a specified interface.

Format

reset loop-detect trigger trigger-down { { interface { interface-type interface-num | interfacename } } | all }

Parameters

Parameter	Description	Value
interface interface-type	Specifies the type of an interface.	-
interface interface-num	Specifies the number of an interface.	-
interface interfacename	Specifies the name of an interface.	-
all	Specifies all interfaces.	-

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
vlan	debug

Usage Guidelines

Usage Scenario

After you have corrected the configurations that may cause loops, run the reset loop-detect trigger trigger-down command to cancel the Down state of all interfaces or the specified interfaces.

Example

# Cancel the Down status of all interfaces.

<HUAWEI> system-view
[~HUAWEI] reset loop-detect trigger trigger-down all