debugging dhcp-access

Function

The debugging dhcp-access packet command enables debugging of the DHCP access packet.

The undo debugging dhcp-access packet command disables debugging of the DHCP access packet.

By default, the debugging of a DHCP access packet is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

debugging dhcp-access packet

undo debugging dhcp-access packet

Parameters

Parameter	Description	Value
packet	packet.	-

Parameter

Description

Value

packet

packet.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
bras-control	debug

Usage Guidelines

Usage Scenario

The debugging dhcp-access packet command enables debugging of the DHCP access packet. The undo debugging dhcp-access packet command disables debugging of the DHCP access packet.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable debugging of the DHCP access packet.

<HUAWEI> debugging dhcp-access packet