debugging dhcp server

Function

The debugging dhcp server command enables debugging of the DHCP server module.

The undo debugging dhcp server command disables debugging of the DHCP server module.

By default, the debugging of the DHCP server module is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

debugging dhcp server { event | error | packet | all | timer | info } [ interface { interface-type interface-number | interface-name } ]

undo debugging dhcp server { event | error | packet | all | timer | info } [ interface { interface-type interface-number | interface-name } ]

Parameters

Parameter	Description	Value
event	Enables or disables event debugging of the DHCP server module.	-
error	Enables or disables error debugging of the DHCP server module.	-
packet	Enables or disables packet debugging of the DHCP server module.	-
all	Enables or disables all debugging of the DHCP server module.	-
timer	Enables or disables timer debugging of the DHCP server module.	-
info	Enables or disables message debugging of the DHCP server module.	-
interface interface-type interface-number	Enables or disables error debugging of the DHCP server module on the interface with the specified type and number.	-
interface-name	Enables or disables error debugging of the DHCP server module on the interface with the specified name.	-

Views

User view

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dhcp	execute

Usage Guidelines

Usage Scenario

To locate a fault on the DHCP server module, run the debugging dhcp server command to view debugging information of the DHCP server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable all debugging of the DHCP server.

<HUAWEI> debugging dhcp server all