CLKSYNC/4/SRCCHANGE

Message

CLKSYNC/4/SRCCHANGE: The attributes of the time source are changed. (SourceName=[SourceName], Priority1=[Priority1], Priority2=[Priority2], ClockClass=[ClockClass], ClockAccuracy=[ClockAccuracy], TimeSource=[TimeSource])

In VS mode, this log is supported only by the admin VS.

Description

The attributes of a time source include priority 1, priority 2, clock class, clock accuracy, and time source type. This log is generated when any of the preceding attributes changes. The attribute change is usually caused by the command configuration.

Parameters

Parameter Name	Parameter Meaning
SourceName	Name of the time source.
Priority1	Priority 1.
Priority2	Priority 2.
ClockClass	Class of the time source.
ClockAccuracy	Precision of the time source.
TimeSource	Type of the time source.

Possible Causes

The time source attribute was changed using a command.

Procedure

This log message is informational only, and no action is required.