NQA/4/TEST_COMPLETED

Message

NQA/4/TEST_COMPLETED: NQA entry test completed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], HopIndex=[HopIndex], AddressType=[AddressType], Address=[Address], CompletionTimeMin=[CompletionTimeMin], CompletionTimeMax=[CompletionTimeMax], SumCompletionTime=[SumCompletionTime], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], SumCompletionTime2Low=[SumCompletionTime2Low], SumCompletionTime2High=[SumCompletionTime2High], LastGoodProbe=[LastGoodProbe], LastGoodPath=[LastGoodPath])

Description

The test succeeded.

Parameters

Parameter Name	Parameter Meaning
OwnerIndex	Administrator of an NQA test instance
TestName	Name of an NQA test instance
TargetAddressType	Destination address type of an NQA test instance
TargetAddress	Destination address of an NQA test instance
OperStatus	Status of an NQA test instance
Index	Index of the result table
HopIndex	Hop index
AddressType	Address type of an NQA test instance
Address	Address of an NQA test instance
CompletionTimeMin	Minimum RTT value of an NQA test instance
CompletionTimeMax	Maximum RTT value of an NQA test instance
SumCompletionTime	RTT sum of an NQA test instance.
ProbeResponses	Statistics on received packets
SentProbes	Statistics on sent packets
SumCompletionTime2Low	Sum of RTT squared right 32 bits
SumCompletionTime2High	Sum of RTT squared left 32 bits
LastGoodProbe	Time when the latest returned packet is received
LastGoodPath	Time when the last complete path is obtained

Possible Causes

The test succeeded.

Procedure

This trap message is informational only, and no action is required.