TUNNEL-TE/3/TUNNEL_APS_SWITCHFAIL_clear

Message

TUNNEL-TE/3/TUNNEL_APS_SWITCHFAIL_clear: The APS switch fail alarm received by the tunnel protection group is cleared. (IfIndex=[WorkTunnelIfIndex], SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],WorkTunnel=[WorkTunnel], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Parameters

Parameter Name	Parameter Meaning
WorkTunnelIfIndex	Work Tunnel Interface Index
SessionTunnelId	Tunnel ID of a session
LocalLspId	LSP ID of a tunnel session
IngressLsrId	LSR ID of the ingress of a tunnel
EgressLsrId	LSR ID of the egress of a tunnel
WorkTunnel	Name of the working tunnel in a tunnel protection group
SgnlPrtcl	Signaling protocol used by a tunnel session Range of value: 1: RSVP Type 2: STATIC Type 3: CRSTATIC Type
SignalledTunnelName	Tunnel alias.

Possible Causes

The APS switch fail alarm received by the tunnel protection group is cleared.

Procedure

1. This trap message is informational only, and no action is required.