PIC/1/hwCardFail_active-135198

Message

PIC/1/hwCardFail_active: The card failed partially. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=135198, Reason=EEPROM is abnormal.)

In VS mode, this log is supported only by the admin VS.

Description

The subcard experienced a partial failure.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityType	Indicates the type of the physical entity.
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

EEPROM is abnormal.

Procedure

1. Check whether the services on the subcard is running properly.

If so, go to Step 4.
If not, go to Step 2.

2. Insert the subcard properly,check whether the alarm is cleared.

If so, go to Step 5.
If not, go to Step 3.

3. Replace the subcard and check whether the alarm is cleared.

If so, go to Step 5.
If not, go to Step 4.

4. Collect the alarm information, log information, and configuration information, and then contact technical support personnel.

5. End.