DEVM/1/hwChassisFail_active-131351

Message

DEVM/1/hwChassisFail_active: The chassis resumed from partial failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=131351, Reason=Power backplane cable is not stable.)

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The chassis experienced a partial failure.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity, such as chassis.
EntityTrapFaultID	Indicates the error code.
ReasonDescription	Indicates the description of the cause of the trap.

Possible Causes

Power backplane cable is not stable

Procedure

1. Run the slave switchover command to switchover ,and wait for a period of time,check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 2.

2. Contact technical support and check whether the power supply unit backplane cable is securely inserted.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3. Collect trap, log, and configuration information, and contact technical support.

4. End.