CLKM/4/hwClockSourceFreqCheck_clear: The check of frequence normal notification. (hwClockSrcCfgChassisIndex=[hwClockSrcCfgChassisIndex], hwClockSrcCfgSourceTypeIndex=[hwClockSrcCfgSourceTypeIndex], hwClockSrcCfgSourceIndex=[hwClockSrcCfgSourceIndex], hwClockChassisId=[hwClockChassisId], hwClockSrcCfgFreqCheckResult=[hwClockSrcCfgFreqCheckResult], hwClockSrcCfgSourceDescr=[hwClockSrcCfgSourceDescr])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwClockSrcCfgChassisIndex |
Indicates the index of the chassis where the non-PTP clock source is located. In the case of a single chassis, the index is 1. For a chassis where a PTP clock source is located, the index is invalid. |
|
hwClockSrcCfgSourceTypeIndex |
Index of the clock source type. values: bits(1). ptp(2). interface(3). cesacr(4). |
|
hwClockSrcCfgSourceIndex |
Index of the clock source. |
|
hwClockChassisId |
Chassis id. |
|
hwClockSrcCfgFreqCheckResult |
Result of the check of frequency, values: abnormal(0). normal(1). |
|
hwClockSrcCfgSourceDescr |
The description of clock source. |
The frequency offset value of the tracking source changes from above 9.2 ppm to below 8.7 ppm.
This alarm is informational only, and no action is required.