CLKM/2/hwClockSourceInputBelowThreshold_clear: The SSM of input above or equal threshold notification. (hwClockAttributeChassisIndex=[hwClockAttributeChassisIndex], hwClockSrcCfgChassisIndex=[hwClockSrcCfgChassisIndex], hwClockSrcCfgSourceTypeIndex=[hwClockSrcCfgSourceTypeIndex], hwClockSrcCfgSourceIndex=[hwClockSrcCfgSourceIndex], hwClockChassisId=[hwClockChassisId], hwClockPllId=[hwClockPllId], hwClockAttributeInputThreshold=[hwClockAttributeInputThreshold], hwClockSrcCfgSourceSsm=[hwClockSrcCfgSourceSsm])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwClockAttributeChassisIndex |
Indicates the index of the chassis where the non-PTP clock source is located. In the case of a single chassis, the index is 1. For a chassis where a PTP clock source is located, the index is invalid. |
|
hwClockSrcCfgChassisIndex |
Chassis index of the clock source. |
|
hwClockSrcCfgSourceTypeIndex |
Index of the clock source type. values: bits(1). ptp(2). interface(3). cesacr(4). |
|
hwClockSrcCfgSourceIndex |
Index of the clock source. |
|
hwClockChassisId |
Chassis index of the clock source. |
|
hwClockPllId |
Id of the clock source type. values: System(1), system PLL. sync2M-1(2), 2M PLL-1. sync2M-2(3), 2M PLL-2. |
|
hwClockAttributeInputThreshold |
Threshold of the external clock source input. values: prc(2). ssua(4). ssub(8). sec(11). dnu(15). prtc(8194). eprtc(8450). esec(8715). eprc(8962). |
|
hwClockSrcCfgSourceSsm |
SSM of the clock source. values: unk(0). prc(2). ssua(4). ssub(8). sec(11). dnu(15). unknown(16). prtc(8194). eprtc(8450). esec(8715). eprc(8962). |
When the SSM control function is enabled, the input SSM level of the clock source was greater than or equal to the threshold.
This trap message is informational only, and no action is required.