CLKM/4/hwClockSourceOutputBelowThreshold_clear: The SSM of output above threshold notification. (hwClockAttributeChassisIndex=[hwClockAttributeChassisIndex], hwClockChassisId=[hwClockChassisId], hwClockPllId=[hwClockPllId], hwClockAttributeOutThreshold=[hwClockAttributeOutThreshold], hwClockAttributeOutValue=[hwClockAttributeOutValue], hwClockCurSourceName=[hwClockCurSourceName])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwClockAttributeChassisIndex |
Indicates the index of the chassis where the non-PTP clock source is located. In the case of a single chassis, the index is 1. For a chassis where a PTP clock source is located, the index is invalid. |
|
hwClockChassisId |
Chassis id of the clock source. |
|
hwClockPllId |
Id of the clock source type. values: System(1), system PLL. sync2M-1(2), 2M PLL-1. sync2M-2(3), 2M PLL-2. |
|
hwClockAttributeOutThreshold |
Threshold of the external Clock output. values: prc(2). ssua(4). ssub(8). sec(11). dnu(15). The default value is dnu,and that can config as prc,sec,ssua,ssub. |
|
hwClockAttributeOutValue |
SSM of the external Clock output. values: prc(2). ssua(4). ssub(8). sec(11). dnu(15). |
|
hwClockCurSourceName |
Name of the current clock source. |
When the SSM level of the clock signals output by the external clock is higher than the lower threshold, the alarm clearance is reported.
This alarm is informational only, and no action is required.