CLKM/4/hwClockSourceSsmChange: The clock source SSM was changed. (hwClockChassisId=[hwClockChassisId], hwClockCurSourceName=[hwClockCurSourceName], hwClockOldSourceSsm=[hwClockOldSourceSsm], hwClockNewSourceSsm=[hwClockNewSourceSsm])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwClockChassisId |
Chassis ID. The value is fixed to 1 for a single chassis. |
|
hwClockCurSourceName |
Name of the current clock source. |
|
hwClockOldSourceSsm |
SSM before the change. The options are as follows: ssmUnk(0) ssmPrc(2): ssmSsua(4). ssmSsub(8) ssmSec(11) ssmDnu(15). ssmInvalid(255). ssmPrtc(8194) ssmEPrtc(8450) ssmESec(8715). ssmEPrc(8962). |
|
hwClockNewSourceSsm |
Current SSM. The options are as follows: ssmUnk(0) ssmPrc(2): ssmSsua(4). ssmSsub(8) ssmSec(11) ssmDnu(15). ssmInvalid(255). ssmPrtc(8194) ssmEPrtc(8450) ssmESec(8715). ssmEPrc(8962). |
Cause 1: The SSM received by the port changes.
Cause 2: The SSM configured on the interface changed.
Cause 3: The interface went Down, causing the SSM status to change.
This log message is informational only, and no action is required.