EMDI/4/hwEmdiOutRtpSerOverThreshold_clear
Message
EMDI/4/hwEmdiOutRtpSerOverThreshold_clear: The outbound RTP-SER of the channel drops below the threshold.(ChannelName=[hwEmdiChannelName], ChannelSourceAddress=[hwEmdiChannelSourceAddress], ChannelGroupAddress=[hwEmdiChannelGroupAddress], RtpSerThreshold=[hwEmdiRtpSerThreshold], RtpSer=[hwEmdiRtpSerValue], Slot=[hwEmdiChannelSlot], Interface=[hwEmdiChannelInterface])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
hwEmdiChannelName |
Channel name. |
|
hwEmdiChannelSourceAddress |
Channel source address. |
|
hwEmdiChannelGroupAddress |
Channel group address. |
|
hwEmdiRtpSerThreshold |
Current RTP-SER threshold of a channel. |
|
hwEmdiRtpSerValue |
Current RTP-SER value. |
|
hwEmdiChannelSlot |
Slot ID. |
|
hwEmdiChannelInterface |
Interface Name. |
Possible Causes
The outbound RTP-SER of the channel fell below the threshold for 60 consecutive detection periods.
Procedure
This trap message is informational only, and no action is required.